当前位置: 首页 > news >正文

两学一做学习教育网站如何做网络推广外包

两学一做学习教育网站,如何做网络推广外包,石家庄免费专业做网站,用什么做公司宣传网站目录 1、R5为ISP,只能进行IP地址配置,其所有地址均配为公有IP地址。 IP配置 配置公网全网通 2、(1)R1和R5间使用PPP的PAP认证,R5为主认证方。 PAP认证 (2)R2与R5之间使用ppp的CHAP认证&am…

目录

1、R5为ISP,只能进行IP地址配置,其所有地址均配为公有IP地址。

IP配置

配置公网全网通

2、(1)R1和R5间使用PPP的PAP认证,R5为主认证方。

PAP认证

(2)R2与R5之间使用ppp的CHAP认证,R5为主认证方。

(3)R3与R5之间使用HDLC封装。

3、R1、R2、R3构建一个MGRE环境,R1为中心站点,R1、R4间为点到点的GRE。

构建隧道

配置NHRP

查看

配置GRE隧道

4、整个私有网络基于RIP全网可达。

RIP配置

开启R1Tunnel0/0/0口的伪广播功能

 关闭水平分割

 5、所有PC设置私有IP为源IP,可以访问R5环回,实现全网通。 

easy IP配置


1、R5为ISP,只能进行IP地址配置,其所有地址均配为公有IP地址。

IP配置

R1:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
Mar 29 2024 16:47:26-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]q
[R1]int s4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
[R1-Serial4/0/0]q
[R1]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       15.1.1.1/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R1]

R2:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
Mar 29 2024 16:49:49-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]q
[R2]int s4/0/0
[R2-Serial4/0/0]ip add 25.1.1.2 24
[R2-Serial4/0/0]q
[R2]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.2.2/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       25.1.1.2/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R2]

R3:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.3.3 24
[R3-GigabitEthernet0/0/0]
Mar 29 2024 16:52:19-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]q
[R3]int s4/0/0
[R3-Serial4/0/0]ip add 35.1.1.3 24
[R3-Serial4/0/0]q
[R3]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.3.3/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       35.1.1.3/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R3]

R4:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.1.1.4 24
Mar 29 2024 16:54:35-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]q
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.4.4 24
Mar 29 2024 16:54:52-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R4-GigabitEthernet0/0/1]q
[R4]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.4/24          up         up        
GigabitEthernet0/0/1              192.168.4.4/24       up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
[R4]

ISP:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname ISP
[ISP]int s4/0/1
[ISP-Serial4/0/1]ip add 15.1.1.5 24
[ISP-Serial4/0/1]
Mar 29 2024 16:56:20-08:00 ISP %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PP
P IPCP on the interface Serial4/0/1 has entered the UP state. 
[ISP-Serial4/0/1]q
[ISP]int s3/0/1
[ISP-Serial3/0/1]ip add 25.1.1.5 24
[ISP-Serial3/0/1]
Mar 29 2024 16:56:43-08:00 ISP %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PP
P IPCP on the interface Serial3/0/1 has entered the UP state. 
[ISP-Serial3/0/1]q
[ISP]int s4/0/0
[ISP-Serial4/0/0]ip add 35.1.1.5 24
[ISP-Serial4/0/0]
Mar 29 2024 16:57:01-08:00 ISP %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]q
[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip add 45.1.1.5 24
Mar 29 2024 16:57:47-08:00 ISP %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IPon the interface GigabitEthernet0/0/0 has entered the UP state. 
[ISP-GigabitEthernet0/0/0]q
[ISP]int LoopBack 0
[ISP-LoopBack0]ip add 5.5.5.5 24
[ISP-LoopBack0]q
[ISP]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 6
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 6
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.5/24          up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         5.5.5.5/24           up         up(s)     
NULL0                             unassigned           up         up(s)     
Serial3/0/0                       unassigned           down       down      
Serial3/0/1                       25.1.1.5/24          up         up        
Serial4/0/0                       35.1.1.5/24          up         up        
Serial4/0/1                       15.1.1.5/24          up         up        
[ISP]

PC1:

PC2:

PC3:

PC4:

配置公网全网通

R1:

[R1]ip route-static 0.0.0.0 0 15.1.1.5

R2:

[R2]ip route-static 0.0.0.0 0 25.1.1.5

R3:

[R3]ip route-static 0.0.0.0 0 35.1.1.5

R4:

[R4]ip route-static 0.0.0.0 0 45.1.1.5


2、(1)R1和R5间使用PPP的PAP认证,R5为主认证方。

PAP认证

ISP为主认证方,所以在ISP上配置账户:

R5:

[ISP]aaa
[ISP-aaa]local-user a1 password cipher a12345
Info: Add a new user.
[ISP-aaa]local-user a1 service-type ppp
[ISP-aaa]q
[ISP]int s4/0/1
[ISP-Serial4/0/1]ppp authentication-mode pap

R1:

[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap local-user a1 password cipher a12345

验证:

[R1-Serial4/0/0]shutdown 
Mar 29 2024 18:12:22-08:00 R1 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R1-Serial4/0/0]undo shutdown 
[R1-Serial4/0/0]
Mar 29 2024 18:12:31-08:00 R1 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPPon the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]

(2)R2与R5之间使用ppp的CHAP认证,R5为主认证方。

依然是R5为主,故在R5上配置账户:

R5:

[ISP]aaa
[ISP-aaa]local-user b1 password cipher b12345
Info: Add a new user.
[ISP-aaa]local-user b1 service-type ppp
[ISP-aaa]q
[ISP-Serial3/0/1]ppp authentication-mode chap

R2:

[R2]int s4/0/0
[R2-Serial4/0/0]ppp chap user b1	
[R2-Serial4/0/0]ppp chap password cipher b12345

验证:

[R2-Serial4/0/0]shutdown 
Mar 29 2024 18:17:41-08:00 R2 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R2-Serial4/0/0]undo shutdown 
[R2-Serial4/0/0]
Mar 29 2024 18:17:50-08:00 R2 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R2-Serial4/0/0]
Mar 29 2024 18:17:53-08:00 R2 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPPon the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]

(3)R3与R5之间使用HDLC封装。

R5:

[ISP]int s4/0/0
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/CHANGE_ENCAP(l)[14]:The user performe
d the configuration that will change the encapsulation protocol of the link and 
then selected Y. 
[ISP-Serial4/0/0]
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01PPP/4/PHYSICALDOWN(l)[15]:On the interface Se
rial4/0/0, PPP link was closed because the status of the physical layer was Down
. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[16]:The line protocol P
PP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[17]:The line protocol P
PP IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFPDT/4/IF_STATE(l)[18]:Interface Serial4/0/0has turned into DOWN state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFPDT/4/IF_STATE(l)[19]:Interface Serial4/0/0has turned into UP state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFNET/4/LINK_STATE(l)[20]:The line protocol I
P on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]

R3:

[R3]int s4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed 
the configuration that will change the encapsulation protocol of the link and th
en selected Y. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into DOWN state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFPDT/4/IF_STATE(l)[5]:Interface Serial4/0/0 h
as turned into UP state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP 
on the interface Serial4/0/0 has entered the UP state. 
[R3-Serial4/0/0]

验证:

3、R1、R2、R3构建一个MGRE环境,R1为中心站点,R1、R4间为点到点的GRE。

构建隧道

首先配置MGRE隧道:

R1:

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.2.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]source 15.1.1.1
Mar 29 2024 18:33:05-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]

R2:

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.2.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:35:02-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 

R3:

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.2.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:36:12-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]

配置NHRP

R1:

[R1-Tunnel0/0/0]nhrp network-id 100

R2:

[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register 

R3:

[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register 

查看

配置GRE隧道

R1:

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip add 10.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4

R4:

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip add 10.1.1.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre	
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1

R1:

R4:

4、整个私有网络基于RIP全网可达。

RIP配置

R1:

[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]undo summary 	
[R1-rip-1]network 192.168.1.0        	
[R1-rip-1]network 10.0.0.0
[R1-rip-1]

R2:

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary 
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0

R3:

[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]undo summary 
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0

R4:

[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo summary 
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 10.0.0.0

开启R1Tunnel0/0/0口的伪广播功能

[R1-Tunnel0/0/0]nhrp entry multicast dynamic 

 关闭水平分割

水平分割 --- 从哪个接口学到的路由信息将不再从这个接口发出去。

故使用rip的路由器不能发送其他主机的路由信息,要实现全网通,我们就得关闭该功能。

R1:

[R1-Tunnel0/0/0]undo rip split-horizon 

R2:

[R2-Tunnel0/0/0]undo rip split-horizon 

R3:

[R3-Tunnel0/0/0]undo rip split-horizon 

至此,R2和R3就能学习到其他的路由信息。

R2 ping 一下R3后再查看 NHRP表(因为两台路由器间没有发包可能不会更新NHRP表):

R2:

R3:

 5、所有PC设置私有IP为源IP,可以访问R5环回,实现全网通。 

easy IP配置

R1:

[R1]acl 2000	
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]q
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000

检验:

 

R2:

[R2]acl 2000	
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000

检验:

R3:

[R3]acl 2000	
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000

检验:

R4:

[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000

检验:

http://www.khdw.cn/news/8467.html

相关文章:

  • 青海网站建设西宁网络科技公司百度热议怎么上首页
  • 做外卖在哪个网站做好seo培训
  • 网站模游戏推广员到底犯不犯法
  • 广告装饰 技术支持 东莞网站建设怎么做产品推广和宣传
  • 如何使用wordpress模板北京网站优化步
  • 北京快三是官方的吗沈阳关键字优化公司
  • 盐城网站建设找宇联做个网站
  • 农村电商网站建设方案已备案域名30元
  • 怎么做门户网站电商运营工资一般多少钱一个月
  • 做网站用的搜索引擎营销简称
  • 公司网站必须做可信认证吗百度学术论文查重免费检测
  • 计算机学院网站建设培训方案及培训计划
  • 怎么在服务器做网站网站服务器失去响应
  • 石家庄网站建设教程百度百度一下一下
  • 商丘简淘网络科技有限公司seo优化托管
  • 网站建设丿金手指下拉手游推广平台
  • 郑州企业网站推广网站制作出名的公司
  • wordpress漫画在线2021百度新算法优化
  • 大连网站制作最好的公司广西seo搜索引擎优化
  • 动物自己做的网站百度推广关键词排名在哪看
  • 网站后台管理系统界面如何开网站详细步骤
  • 昆明做网站建设有哪些长春百度seo公司
  • 无锡建站模板系统重庆公司网站seo
  • 网站的版式网络营销网站分析
  • 购物网站首页设计百度公司高管排名
  • 北京工程信息网官网我赢网seo优化网站
  • 网站怎么做数据备份模板免费下载网站
  • 和黑人做网站新东方烹饪学校
  • 网站安全检测官网学校招生网络营销方案
  • wordpress回复看内容长沙seo网络公司