当前位置：首页 > news >正文

深圳制作网站流程沈阳关键词优化价格

news 2025/7/7 23:52:49

深圳制作网站流程,沈阳关键词优化价格,天津电商网站制作,网站后台jsp怎么做分页Deep Learning 1. 回归算法思路2. 代码2.1 基础操作2.2 定义相关函数2.3.1 定义图像绘制函数2.3.2 数据集加载及预处理2.3.3 构造数据加载器2.3.4 构建前馈神经网络（Feedforward Neural Network）模型2.3.5 神经网络的训练过程2.3.6 模型评估2.3.7 模型测…

Deep Learning

1. 回归算法思路
2. 代码
- 2.1 基础操作
- 2.2 定义相关函数
- - 2.3.1 定义图像绘制函数
  - 2.3.2 数据集加载及预处理
  - 2.3.3 构造数据加载器
  - 2.3.4 构建前馈神经网络（Feedforward Neural Network）模型
  - 2.3.5 神经网络的训练过程
  - 2.3.6 模型评估
  - 2.3.7 模型测试
  - 2.3.8 模型初始化
- 2.3 模型运行

1. 回归算法思路

基于3层神经网络的回归优化

2. 代码

2.1 基础操作

切换文件路径，并创建新的文件夹：

%cd /content/drive/MyDrive
#change directory to google drive
#!mkdir ML2023
#make a directory named ML2023
%cd ./ML2023
#change directory to ML2023

/content/drive/MyDrive
/content/drive/MyDrive/ML2023

查看当前路径下的文件：

!ls

covid.test.csv covid.train.csv models

显示当前文件路径:

!pwd #output the current directory

/content/drive/MyDrive/ML2023

文件下载：

# Download Data
tr_path = 'covid.train.csv'  # path to training data
tt_path = 'covid.test.csv'   # path to testing data!gdown --id '19CCyCgJrUxtvgZF53vnctJiOJ23T5mqF' --output covid.train.csv
!gdown --id '1CE240jLm2npU-tdz81-oVKEF3T2yfT1O' --output covid.test.csv

Downloading…
From: https://drive.google.com/uc?id=19CCyCgJrUxtvgZF53vnctJiOJ23T5mqF
To: /content/covid.train.csv
100% 2.00M/2.00M [00:00<00:00, 31.7MB/s]
Downloading…
From: https://drive.google.com/uc?id=1CE240jLm2npU-tdz81-oVKEF3T2yfT1O
To: /content/covid.test.csv
100% 651k/651k [00:00<00:00, 10.2MB/s]

导入所需要的相关包：

# Import Some Packages
# PyTorch
import torch
import torch.nn as nn
from torch.utils.data import Dataset, DataLoader# For data preprocess
import numpy as np
import csv
import os# For plotting
import matplotlib.pyplot as plt
from matplotlib.pyplot import figure# For feature selection
from sklearn.feature_selection import SelectKBest
from sklearn.feature_selection import mutual_info_regression

2.2 定义相关函数

2.3.1 定义图像绘制函数

def get_device():''' Get device (if GPU is available, use GPU) '''return 'cuda' if torch.cuda.is_available() else 'cpu'def plot_learning_curve(loss_record, title=''):''' Plot learning curve of your DNN (train & dev loss) dev：development'''total_steps = len(loss_record['train']) #x_1 = range(total_steps)figure(figsize=(6, 4))plt.plot(x_1, loss_record['train'], c='tab:red', label='train')if len(loss_record['dev'])!=0:x_2 = x_1[::len(loss_record['train']) // len(loss_record['dev'])] # 计算步长，保持训练集和开发集步长一致plt.plot(x_2, loss_record['dev'], c='tab:cyan', label='dev')plt.ylim(0.0, 20.0) # 设置纵坐标的范围，将其限制在0.0到20.0之间plt.xlabel('Training steps')plt.ylabel('MSE loss') # RMSE？plt.title('Learning curve of {}'.format(title))plt.legend()plt.show()# 绘制预测结果的散点图
def plot_pred(dv_set, model, device, lim=35., preds=None, targets=None):# dv_set：开发集（或验证集）的数据集，包含输入特征和实际目标值。# model：训练好的深度神经网络模型，用于进行预测。# device：指定模型在哪个设备上运行，通常是CPU或GPU。# lim：横纵坐标的限制范围，默认为35。# preds：模型的预测值（可选参数），如果未提供，则会重新计算。# targets：实际目标值（可选参数），如果未提供，则会重新获取''' Plot prediction of your DNN '''if preds is None or targets is None:model.eval()preds, targets = [], []for x, y in dv_set: # x是输入特征，y是实际目标值x, y = x.to(device), y.to(device)with torch.no_grad():pred = model(x)preds.append(pred.detach().cpu())targets.append(y.detach().cpu())preds = torch.cat(preds, dim=0).numpy()targets = torch.cat(targets, dim=0).numpy()figure(figsize=(5, 5))plt.scatter(targets, preds, c='r', alpha=0.5)plt.plot([-0.2, lim], [-0.2, lim], c='b')plt.xlim(-0.2, lim)plt.ylim(-0.2, lim)plt.xlabel('ground truth value')plt.ylabel('predicted value')plt.title('Ground Truth v.s. Prediction')plt.show()

2.3.2 数据集加载及预处理

class COVID19Dataset(Dataset):''' Dataset for loading and preprocessing the COVID19 dataset '''# target_only：一个布尔值，表示是否仅使用目标特征（在这里是最后一列）# 如果target_only为True，则只选择目标特征，否则选择一组特定的特征def __init__(self,path,mode='train',target_only=False):self.mode = mode# Read data into numpy arrayswith open(path, 'r') as fp:data = list(csv.reader(fp))data = np.array(data[1:])[:, 1:].astype(float) # 切片操作去掉第1列和行if not target_only:feats = list(range(93)) # 一共94个特征，但是需要除去最后一个特征，最后一个特征是用来预测的else:# TODO: Using 40 states & 2 tested_positive features (indices = 57 & 75)!!!# 使用硬编码feats = [40, 41, 42, 43, 57, 58, 59, 60, 61, 75, 76, 77, 78, 79] # sklean mutual infoif mode == 'test':# Testing data# data: 893 x 93 (40 states + day 1 (18) + day 2 (18) + day 3 (17))data = data[:, feats]self.data = torch.FloatTensor(data)else:# Training data (train/dev sets)# data: 2700 x 94 (40 states + day 1 (18) + day 2 (18) + day 3 (18))target = data[:, -1]data = data[:, feats]# 整个train+dev一起mean/stdself.mean = torch.FloatTensor(data).mean(dim=0, keepdim=True) # 计算张量中每列的均值# keepdim=True保持结果的维度与输入张量相同，结果将仍然是一个包含均值的张量，但它将具有与每列相同的维度self.std = torch.FloatTensor(data).std(dim=0, keepdim=True)# Splitting training data into train & dev setsif mode == 'train':indices = [i for i in range(len(data)) if i % 5 != 0]elif mode == 'dev':indices = [i for i in range(len(data)) if i % 5 == 0]# Convert data into PyTorch tensorsself.data = torch.FloatTensor(data[indices])self.target = torch.FloatTensor(target[indices])self.dim = self.data.shape[1] # 获取数据集self.data的列数，也就是特征的数量print('Finished reading the {} set of COVID19 Dataset ({} samples found, each dim = {})'.format(mode, len(self.data), self.dim))# All subclasses should overwrite __getitem__, # supporting fetching a data sample for a given key. def __getitem__(self, index):# Returns one sample at a timeif self.mode in ['train', 'dev']:# For trainingreturn self.data[index], self.target[index]else:# For testing (no target)return self.data[index]def __len__(self):# Returns the size of the datasetreturn len(self.data)def normalization(self, mean=None, std=None):# Normalize features (you may remove this part to see what will happen)# The mean and standard variance of training data will be reused to normalize testing data.if self.mode == 'train' or self.mode =='dev':mean = self.meanstd = self.stdself.data =  (self.data-mean) / stdelse:self.data =  (self.data-mean) / stdreturn mean, std

Z-Score 标准化（标准差标准化）： 将数据缩放到均值为0，标准差为1的标准正态分布

计算特征的均值（mean）：
$\mu = \frac{1}{N} \sum_{i=1}^{N} x_i$
计算特征的标准差（standard deviation）：
$\sigma = \sqrt{\frac{1}{N} \sum_{i=1}^{N} (x_i - \mu)^2}$
对每个数据点 $x_i$ ，应用以下标准化公式：
$z_i = \frac{x_i - \mu}{\sigma}$
数据的均值为0，即标准化后的数据集的均值接近于0。
数据的标准差为1，即标准化后的数据集的标准差接近于1。
数据的分布形状不会改变，只是尺度和位置发生了变化。
Z-Score 标准化适用于许多统计和机器学习算法，特别是对于需要计算距离或涉及梯度下降等数值计算的算法。通过标准化，可以确保不同特征的尺度不会对模型的训练产生不适当的影响，帮助模型更快地收敛并提高性能。

Min-Max 标准化（最小-最大值缩放）：

计算特征的最小值： $x_{\text{min}} = \min(x_1, x_2, \ldots, x_N)$
计算特征的最大值： $x_{\text{max}} = \max(x_1, x_2, \ldots, x_N)$
对每个数据点 $x_i$ ，应用以下标准化公式：
$x_i' = \frac{x_i - x_{\text{min}}}{x_{\text{max}}- x_{\text{min}}}$
$\sigma$ 表示标准差。
$N$ 表示数据点的总数。
$x_i$ 表示数据集中的第 i 个数据点。
$\mu$ 表示数据集的均值（平均值），计算方式为： $\mu = \frac{1}{N} \sum_{i=1}^{N} x_i$

2.3.3 构造数据加载器

构造数据加载器，用于训练、验证或测试机器学习模型。

# 定义函数可接受多个参数，包括数据文件路径path、数据集模式mode、批量大小batch_size、并行工作数n_jobs、
# 是否仅使用目标数据target_only以及均值和标准差的参数。
def prep_dataloader(path, mode, batch_size, n_jobs=0, target_only=False, mean=None, std=None):''' Generates a dataset, then is put into a dataloader. '''# Construct datasetdataset = COVID19Dataset(path, mode=mode, target_only=target_only) mean, std = dataset.normalization(mean, std)# 创建数据加载器对象：将数据集划分成小批量，并提供批量数据以供模型训练dataloader = DataLoader(dataset, batch_size,shuffle=(mode == 'train'),     # shuffle为一个布尔值，指示是否在每个周期（epoch）之前随机打乱数据。# 通常在训练模型时设置为True，确保每个周期中的样本顺序不同。drop_last=False,num_workers=n_jobs, pin_memory=True)              return dataloader, mean, std

2.3.4 构建前馈神经网络（Feedforward Neural Network）模型

在这里插入图片描述

class NeuralNet(nn.Module):''' A simple fully-connected deep neural network '''def __init__(self, input_dim):super(NeuralNet, self).__init__()# Define neural network here# TODO: How to modify this model to achieve better performance?# 定义了神经网络的结构，包括输入层、隐藏层和输出层。self.net = nn.Sequential(nn.Linear(input_dim, 64),nn.ReLU(),nn.Linear(64, 16),nn.ReLU(),nn.Linear(16,8),nn.ReLU(),nn.Linear(8,4),nn.ReLU(),nn.Linear(4,1) # 单个输出神经元的线性层，用于回归任务)# Mean squared error loss# reduction='mean'：损失值会被平均计算self.criterion = nn.MSELoss(reduction='mean') def forward(self, x):''' Given input of size (batch_size x input_dim), compute output of the network '''return self.net(x).squeeze(1)def cal_loss(self, pred, target, l1_lambda):# target：真实的目标值# l1_lambda：L1正则化的超参数，用于控制正则化的强度''' Calculate loss '''# TODO: you may implement L2 regularization hereloss = self.criterion(pred, target)# L1 regularizationl1_reg = torch.tensor(0.).to(device)for param in model.parameters():l1_reg += torch.sum(torch.abs(param))loss += l1_lambda * l1_regreturn loss

2.3.5 神经网络的训练过程

设置训练超参数和优化器：代码从配置文件中获取了训练超参数，包括最大的训练周期数（n_epochs）、优化器类型（optimizer）、以及优化器的超参数（optim_hparas）。然后，通过 PyTorch 中的 getattr 函数创建了相应类型的优化器（如 Adam、SGD 等）。
初始化记录器和计数器：代码初始化了一些变量，包括损失记录器 loss_record，用于记录每个训练周期的训练和开发（验证）集损失，以及用于早停（Early Stopping）的计数器 early_stop_cnt。
开始训练循环：代码进入了一个训练循环，该循环在最大训练周期数内运行，或者在出现早停情况下提前结束训练。
模型训练：在每个训练周期内，代码设置模型为训练模式（model.train()），然后迭代训练数据集中的每个批次。
验证集评估：每个训练周期结束后，代码使用验证集（开发集）对模型进行评估，计算验证集上的均方误差。如果验证集上的均方误差小于之前的最小值（min_mse），则保存模型参数，并重置早停计数器 early_stop_cnt。这有助于防止过拟合，并在性能改善时保存模型。
早停策略：如果连续 early_stop 个训练周期内都没有性能改善（验证集损失不再降低），训练过程将提前结束。
训练结束：训练结束后，代码打印出训练周期数，然后返回最小的验证集均方误差和损失记录器 loss_record。

def train(tr_set, dv_set, model, config, device):''' DNN training '''n_epochs = config['n_epochs']  # Maximum number of epochs# Setup optimizeroptimizer = getattr(torch.optim, config['optimizer'])(model.parameters(), **config['optim_hparas'])min_mse = 1000.loss_record = {'train': [], 'dev': []}      # for recording training lossearly_stop_cnt = 0epoch = 0while epoch < n_epochs:model.train()                           # set model to training modefor x, y in tr_set:                     # iterate through the dataloaderoptimizer.zero_grad()               # set gradient to zerox, y = x.to(device), y.to(device)   # move data to device (cpu/cuda)pred = model(x)                     # forward pass (compute output)mse_loss = model.cal_loss(pred, y, config['l1_lambda'])  # compute lossmse_loss.backward()                 # compute gradient (backpropagation)optimizer.step()                    # update model with optimizerloss_record['train'].append(mse_loss.detach().cpu().item())# After each epoch, test your model on the validation (development) set.dev_mse = dev(dv_set, model, device)if dev_mse < min_mse:# Save model if your model improvedmin_mse = dev_mseprint('Saving model (epoch = {:4d}, val_loss = {:.4f})'.format(epoch + 1, min_mse))torch.save(model.state_dict(), config['save_path'])  # Save model to specified pathearly_stop_cnt = 0else:early_stop_cnt += 1epoch += 1loss_record['dev'].append(dev_mse)if early_stop_cnt > config['early_stop']:# Stop training if your model stops improving for "config['early_stop']" epochs.breakprint('Finished training after {} epochs'.format(epoch))return min_mse, loss_record

2.3.6 模型评估

def dev(dv_set, model, device):model.eval()                                # set model to evalutation modetotal_loss = 0for x, y in dv_set:                         # iterate through the dataloaderx, y = x.to(device), y.to(device)       # move data to device (cpu/cuda)with torch.no_grad():                   # disable gradient calculationpred = model(x)                     # forward pass (compute output)mse_loss = model.cal_loss(pred, y, config['l1_lambda'])  # compute losstotal_loss += mse_loss.detach().cpu().item() * len(x)  # accumulate losstotal_loss = total_loss / len(dv_set.dataset)              # compute averaged lossreturn total_loss

2.3.7 模型测试

def test(tt_set, model, device):model.eval()                                # set model to evalutation modepreds = []for x in tt_set:                            # iterate through the dataloaderx = x.to(device)                        # move data to device (cpu/cuda)with torch.no_grad():                   # disable gradient calculationpred = model(x)                     # forward pass (compute output)preds.append(pred.detach().cpu())   # collect predictionpreds = torch.cat(preds, dim=0).numpy()     # concatenate all predictions and convert to a numpy arrayreturn preds

2.3.8 模型初始化

初始化训练过程中需要的设备、目录和超参数配置，以便在训练模型之前进行必要的准备工作。

device = get_device()                 # get the current available device ('cpu' or 'cuda')
os.makedirs('models', exist_ok=True)  # The trained model will be saved to ./models/
target_only = True                   # TODO: Using 40 states & 2 tested_positive featuresseed = 459
np.random.seed(seed)
delta = np.random.normal(loc=0,scale = 0.000001)# TODO: How to tune these hyper-parameters to improve your model's performance?
config = {'n_epochs': 3000,                # maximum number of epochs'batch_size': 270,               # mini-batch size for dataloader'optimizer': 'Adam',             # optimization algorithm (optimizer in torch.optim)'optim_hparas': {                # hyper-parameters for the optimizer (depends on which optimizer you are using)'lr': 0.003,                 # learning rate of Adam#'weight_decay': 1e-8        # weight decay (L2 regularization)},'l1_lambda':1e-5 + delta,        # L1 regularization'early_stop': 200,               # early stopping epochs (the number epochs since your model's last improvement)'save_path': 'models/model.pth'  # your model will be saved here
}myseed = 42069  # set a random seed for reproducibility
torch.backends.cudnn.deterministic = True
torch.backends.cudnn.benchmark = False
np.random.seed(myseed)
torch.manual_seed(myseed)
if torch.cuda.is_available():torch.cuda.manual_seed_all(myseed)

2.3 模型运行

tr_set, mean, std = prep_dataloader(tr_path, 'train', config['batch_size'], target_only=target_only)
dv_set, _, _ = prep_dataloader(tr_path, 'dev', config['batch_size'], target_only=target_only, mean=mean, std=std)
tt_set, _, _ = prep_dataloader(tt_path, 'test', config['batch_size'], target_only=target_only, mean=mean, std=std)

Finished reading the train set of COVID19 Dataset (2160 samples found, each dim = 14)
Finished reading the dev set of COVID19 Dataset (540 samples found, each dim = 14)
Finished reading the test set of COVID19 Dataset (893 samples found, each dim = 14)

model = NeuralNet(tr_set.dataset.dim).to(device)  # Construct model and move to device

model_loss, model_loss_record = train(tr_set, dv_set, model, config, device)

在这里插入图片描述

plot_learning_curve(model_loss_record, title='deep model')

在这里插入图片描述

del model
model = NeuralNet(tr_set.dataset.dim).to(device)
ckpt = torch.load(config['save_path'], map_location='cpu')  # Load your best model
model.load_state_dict(ckpt)
if len(dv_set) > 0:plot_pred(dv_set, model, device)  # Show prediction on the validation set

在这里插入图片描述

def save_pred(preds, file):''' Save predictions to specified file '''print('Saving results to {}'.format(file))with open(file, 'w') as fp:writer = csv.writer(fp)writer.writerow(['id', 'tested_positive'])for i, p in enumerate(preds):writer.writerow([i, p])preds = test(tt_set, model, device)  # predict COVID-19 cases with your model
save_pred(preds, 'COVID-19 pred.csv')  # save prediction file to COVID-19 pred.csv